PIAGGIO PORTER 1.3 16V 2008 User Manual

5. Fit the inlet manifold supports and tighten the
fixing bolts.
6. Fit the engine wire ground lead to the inlet mani-
fold.
7. Connect the fuel inlet and reverse fuel pipe.
8. Connect the water pipe.
9. Connect the blow-by pipe, suction pipes and
throttle cable.
10. Fit the injector vibration insulators and delivery
pipe thermal insulators.
11. Fit the injectors on the inlet manifold.
12. Fit the delivery pipe.
13. Tighten the fixing nuts.
Locking torques (N*m)
Inlet manifold - Fuel delivery pipe 6÷11
PORTER 1.3 16V Engine
EN - 227

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English