PIAGGIO PORTER 1.3 16V 2008 User Manual

Fuel pipe
Pipe insertion length
Insert the pipe so that L1 is at 0 - 2 mm
Clip position.
Fix it so that L2 is at 2 - 5 mm (the clip must not be
placed on the pipe elbow. Besides, it must not ex-
ceed the pipe end).
Suction pipe
Pipe insertion length
Insert the pipe as shown in the figure on the side.
Clip position
The clip end must be at a 2 mm distance from the
pipe end.
KEY:
A= Elbow starting point
Iniection System PORTER 1.3 16V
IS - 398

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English