PIAGGIO PORTER 1.3 16V 2008 User Manual

Radiator fitting
1. Fit the radiator fan and the relevant protection
on the radiator and tighten the fixing nuts.
2. Insert the right and left supports of the radiator
on the radiator.
3. Fit the radiator with the relevant supports on the
vehicle and tighten the 4 screws fixing the radiator
supports.
4. Connect the radiator fan connector.
5. Connect the radiator inlet, outlet pipe and the
water pipe for the heater.
6. Fit the reinforcement on the vehicle.
7. Fit the front bumpers on the vehicle.
8. Connect the battery negative (-) terminal.
9. Refill with coolant.
10. Fit the front panel gasket on the vehicle.
PORTER 1.3 16V Engine
EN - 369

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English