PIAGGIO PORTER 1.3 16V 2008 User Manual

Crankshaft fitting
1. Fit the main bushings on the block and on sup-
ports.
N.B.
- DO NOT TOUCH THE FRONT AND LOWER SURFACES
OF BUSHINGS. MAKE SURE THAT BUSHINGS ARE PER-
FECTLY FITTED.
2. Lubricate the seat of each bushing with engine
oil.
- DO NOT TOUCH THE FRONT AND LOWER SURFACES
OF BUSHINGS. DO NOT APPLY ENGINE OIL ONTO THE
MAIN BEARINGS.
3. Fit the crankshaft in the cylinder block.
4. Apply engine oil onto the shoulder rings.
Fit the shim half rings on support No. 3, make sure
that grooves are facing towards the crankshaft.
Engine PORTER 1.3 16V
EN - 328

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English