Lenze 8400 User Manual

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 1538
17 Function library
17.2 System blocks | LS_MotionControlKernel
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Parameters
17.2.14 LS_MotionControlKernel
Interface to the basic drive functions implemented in Motion Control Kernel (MCK).
17.2.15 LS_MotorInterface
Interface to internal motor control.
Parameters Possible settings Info
C00727/1...8
0 1 Keypad digital values
• Execution of control commands
for keypad operation
• See the "Outputs" table for the
meaning of the individual
subcodes
C00728/1...3
-199.99 % 199.99 Analog values - keypad
• Selection of various setpoints for
operation via keypad
• See the "Outputs" table for the
meaning of the individual
subcodes
 For a detailed description see the main chapter "Basic drive functions":
Internal interfaces | System block "LS_MotionControlKernel"
( 499)
 For a detailed description see the main chapterl "Motor control (MCTRL)":
Internal interfaces | System block "LS_MotorInterface"
( 312)

Lenze 8400 Specifications

General

Category	DC Drives
Series	8400
Protection class	IP20
Control Type	Vector control
Communication	CANopen, PROFIBUS, Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Input Voltage	AC 230/400/480 V