Lenze 8400 User Manual

15 Parameter reference
15.1 Structure of the parameter descriptions
804
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
15.1.1 Data type
The following data types are available for parameters:
15.1.2 Parameters with read-only access
Parameters for which the "write access" attribute has not been set can only be read and not be
changed by the user.
Description structure
Representation in the »Engineer«
The »Engineer« displays these parameters with a grey background or, with an online connection,
with a pale-yellow background:
Data type Meaning
INTEGER_16 16-bit value with sign
INTEGER_32 32-bit value with sign
UNSIGNED_8 8-bit value without sign
UNSIGNED_16 16-bit value without sign
UNSIGNED_32 32-bit value without sign
VISIBLE_STRING String of characters of printable characters
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Display range (min. value | unit | max. value)
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1

Lenze 8400 Specifications

General

Category	DC Drives
Series	8400
Protection class	IP20
Control Type	Vector control
Communication	CANopen, PROFIBUS, Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Input Voltage	AC 230/400/480 V