Lenze 8400 User Manual

8 Basic drive functions (MCK)
8.4 Basic settings
528
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.4 Basic settings
8.4.1 Machine parameters
The motor end, among other things, is described by the machine parameters indicated below in
respect of the mechanics used.
For TA "Table positioning"
, you can set the machine parameters in the »Engineer» on the tab headed
Application Parameters on the dialog level Overview  Machine parameters:
 Tip!
You are provided with more detailed information on the machine parameters "Gearbox
ratio" and "Feed constant" in the following subchapters.
 Note!
Setting the machine parameters is a basic prerequisite for the operating modes
"Homing
", "Manual jog" and "Positioning".
The more precisely the machine parameters are set, the better the results of positioning!

Lenze 8400 Specifications

General

Category	DC Drives
Series	8400
Protection class	IP20
Control Type	Vector control
Communication	CANopen, PROFIBUS, Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Input Voltage	AC 230/400/480 V