Lenze 8400 User Manual

Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 681
9 Diagnostics & error management
9.11 "LS_SetError_2" system block
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.11 "LS_SetError_2" system block
This system block is used to implement error handling within the application.
• The application can trip up to four different user error messages with parameterisable error IDs
and error responses via the four boolean inputs.
• If several inputs are set to TRUE at the same time, the input with the lowest number will trip the
error message.
Inputs
Parameters
Designator
Data type
Information/possible settings
bSetError1
BOOL
Input for tripping "User error 5"
• Error subject number: 984
•Error number: (C00581/5
x 0x0400000) + (984 x 0x10000) + (C00161/5)
bSetError2
BOOL
Input for tripping "User error 6"
• Error subject number: 985
•Error number: (C00581/6
x 0x0400000) + (985 x 0x10000) + (C00161/6)
bSetError3
BOOL
Input for tripping "User error 7"
• Error subject number: 986
•Error number: (C00581/7
x 0x0400000) + (986 x 0x10000) + (C00161/7)
bSetError4
BOOL
Input for tripping "User error 8"
• Error subject number: 987
•Error number: (C00581/8
x 0x0400000) + (987 x 0x10000) + (C00161/8)
Parameters Possible settings Info
C00161/5...8 0 ... 65535 Error ID for user errors 5 ... 8
C00581/5...8
Response to user errors 5 ... 8
0No Reaction
1Fault
2Trouble
3 TroubleQuickStop
4 WarningLocked
5 Warning
6Information
/6B6HW(UURUB


 
 




E6HW(UURU
E6HW(UURU
E6HW(UURU
E6HW(UURU
(UURULG&
5HDFWLRQ
&
(UURULG
&
5HDFWLRQ
&
(UURULG
&
5HDFWLRQ
&
(UURULG
&
5HDFWLRQ
&

Lenze 8400 Specifications

General

Category	DC Drives
Series	8400
Protection class	IP20
Control Type	Vector control
Communication	CANopen, PROFIBUS, Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Input Voltage	AC 230/400/480 V