Lenze 8400 User Manual

10 Oscilloscope function
10.3 Managing oscillograms
696
Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10.3.2 Saving the oscillogram in a file
After the signal sources to be recorded have been selected and the required settings have been
entered, you can save the configuration and recording, if already executed, for future use in the
project or export them to a file.
 How to save an oscillogram in the project:
1. Click the icon in the oscilloscope toolbar.
•The Open oscillogram file dialog box appears.
2. Specify a file name in the File name input field.
3. Click the Filing in the project button.
• The dialog box is closed and the current oscillogram is filed in the project.
 How to save an oscillogram as external file:
1. Click the icon in the oscilloscope toolbar.
•The Open oscillogram file dialog box appears.
2. Press the Save as external file ... button.
• A new window opens in which the directory and the file name for the oscillogram to be
saved have to the specified.
3. Click the Save button.
• The dialog box is closed and the current oscillogram is saved.
 Note!
The reuse of a saved configuration is only reasonable for devices of the same type, as
otherwise due to a scaling of the oscilloscope channels that is not adapted, incorrect
values are displayed!
 Note!
The oscillogram is only saved if the entire project is saved!

Lenze 8400 Specifications

General

Category	DC Drives
Series	8400
Protection class	IP20
Control Type	Vector control
Communication	CANopen, PROFIBUS, Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Input Voltage	AC 230/400/480 V