Lenze 8400 User Manual

4 Device control (DCTRL)
98 Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4 Device control (DCTRL)
This chapter provides information on internal device control as well as the device commands which
can be executed via the subcodes of C00002
.
• The device control causes the inverter to take defined device statuses.
• The device control provides a multitude of status information in many ways:
• Visually via the LED status displays
on the front of the inverter. ( 625)
• As text messages in the Logbook
. ( 632)
• As process signals via the outputs of the LS_DriveInterface
system block. ( 126)
• Via diagnostic / display parameters which are included in the »Engineer« parameter list as
well as in the Diagnostics category in the keypad.
 Note!
The device states of the inverter are based on the operating states of the CiA402
standard. Device state machine and device states
( 112)

Lenze 8400 Specifications

General

Category	DC Drives
Series	8400
Protection class	IP20
Control Type	Vector control
Communication	CANopen, PROFIBUS, Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature
Input Voltage	AC 230/400/480 V