Lenze · 8400 HighLine · Reference manual · DMS 12.0 EN · 06/2017 · TD23 57
3 Commissioning
3.6 Manual motor direction of rotation check (manual control)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.6 Manual motor direction of rotation check (manual control)
The »Engineer« function "Manual control" easily allows for controlling the direction of rotation of
the motor. The manual control serves to let the motor connected to the inverter with an adjustable
speed for an adjustable time.
How to carry out a manual motor direction of rotation check using the »Engineer«:
1. Go to the Project view and select the 8400 HighLine inverter.
2. Going online.
After a connection to the inverter has been established, the following status is displayed in
the Status line:
3. Click the symbol to inhibit the inverter via device command.
4. Ensure that the following conditions are met:
• The mains voltage is switched on.
• No trouble is active.
• Safe torque off (STO) is not active.
5. Enable inverter via terminal: Set terminal X5/RFR to HIGH level.
6. Click the icon to open the Manual motor rotation indication dialog box.
Note: If the "not ready for operation" status is displayed, check whether all conditions
mentioned before (see steps 3 ... 5) have been met.
7. Set the desired speed and runtime.
(The speed refers to the reference speed set in C00011
.)
8. Click the button to let the motor rotate with the set speed for the set runtime.
By clicking the button, the function can be aborted.
Note!
Take all the necessary safety precautions before you carry out the following
commissioning steps and switch the device on!
Safety instructions with regard to commissioning
( 52)
To Next Page
Loading...
Need help?
General
