Xerox WorkCentre 5230 User Manual

February, 2008
6-5
WorkCentre 5225, 5230
Jam Report, Failure Report
General Procedures
Launch Version
Jam Report
Purpose
To check the frequency of jams.
Print Contents
Perform following to print Jam Report
1. Enter UI Diagnostics (UI Diagnostic Mode).
2. Press the Machine Status button on the Control Panel.
3. Select the Billing Meter/Print Reports tab on the display.
4. Select the Print Reports/List button.
5. Select the Jam Report button.
6. Press the Start button to print Jam Report
Failure Report
Purpose
To display the frequency of failures.
Print Contents
Perform following to print Failure Report.
1. Enter UI Diagnostics (UI Diagnostic Mode).
2. Press the Machine Status button on the Control Panel.
3. Select the Billing Meter/Print Reports tab on the display.
4. Select the Print Reports/List button.
5. Select the Failure Report button.
6. Press the Start button to print Failure Report.

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier