February, 2008
2-217
WorkCentre 5225, 5230
016-709, 016-710
Status Indicator Raps
Launch Version
016-709 ART EX Command RAP
An ART EX command error occurred during PLW processing.
Initial Actions
Power Off/On
Procedure
Ask customer to cancel and rerun the job.
016-710 Delayed Print RAP
• A Delay Print Job was received from the machine that has no HDD installed.
• The number of jobs that can be simultaneously received (100 jobs) was exceeded.
Initial Actions
Power Off/On
Procedure
Check the HDD electrical connections (PL 9.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists, replace the HDD (PL 9.2).
To Next Page
Loading...
Need help?
General
