Xerox WorkCentre 5230 User Manual

February, 2008
2-180
WorkCentre 5225, 5230
016-362, 016-363
Launch Version
Status Indicator Raps
016-362 ESS UI Failure-2 RAP
UI Communication error VRAM W/R/V test error if Long Boot Mode is entered, Command/Sta-
tus line would be normal.
Initial Actions
Power Off/On
Procedure
Perform the following in order:
• Remove/insert UI Cable
• Remove/insert UI Card
• Replace the UI Cable
• Replace the UI Card
• Replace the UI (PL 11.1)
• Replace ESS PWB (PL 9.2)
016-363 ESS LyraCard Failure RAP
PCI Config space W/R/V test or internal register W/R/V test error.
Initial Actions
Power Off/On
Procedure
Perform the following in order:
• Remove/insert LYZER Card
• Remove/insert JPEG PWB
• Replace the LYZER Card
• Replace the JPEG PWB
• Replace ESS PWB (PL 9.2)

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier