Xerox WorkCentre 5230 User Manual

February, 2008
2-266
WorkCentre 5225, 5230
018-509, 018-509
Launch Version
Status Indicator Raps
018-509 Template Parameter Conflict RAP
1. In CUI scanning, start of a job designated with template name that does not exit is requested.
2. Job template attribute conflict.
3. Address of server for image storage is not set in job template.
Procedure
Check if the content designated with job template is correct or not, for example:
-Setting that is not usable in the device is described.
-Transfer destination repository is not correctly set.
-Template name that does not exist is designated.
018-509 Template Parameter Conflict RAP
1. In CUI scanning, start of a job designated with template name that does not exit is requested.
2. Job template attribute conflict.
3. Address of server for image storage is not set in job template.
Procedure
Check if the content designated with job template is correct or not, for example:
-Setting that is not usable in the device is described.
-Transfer destination repository is not correctly set.
-Template name that does not exist is designated.

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier