Xerox WorkCentre 5230 User Manual

February, 2008
2-486
WorkCentre 5225, 5230
035-737, 035-738
Launch Version
Status Indicator Raps
035-737 Fax Protocol RAP
BSD-ON:16.1/17.1
The Fax controller received the DCN (Disconnect) signal, or no response was returned from
the receiving Fax to the EOR (End Of Retransmission) signal sent by the Fax controller.
Resending of CTC/EOR (Continue To Correct/End Of Retransmission) signal exceeded the
limit.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
035-738 Fax Protocol RAP
BSD-ON:16.1/17.1
The Fax controller received the DCN (Disconnect) signal from the receiving Fax, or no
response was returned from the receiving Fax to the RR (Receive Ready) signal sent by the
Fax controller.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier