Xerox WorkCentre 5230 User Manual

February, 2008
2-598
WorkCentre 5225, 5230
116-336, 116-337
Launch Version
Status Indicator Raps
116-336 HDD Access RAP
A failure is detected during HDD access
Initial Actions
Power Off/On
Procedure
Check the HDD electrical connections (PL 9.2).
If the problem persists perform Hard Disk Diagnostic Program.
If the problem persists replace the HDD (PL 9.2).
116-337 SNTP Software RAP
An error in SNTP (Simple Network Transfer Processing) caused in internal shutdown.
Initial Actions
Power Off/On
Procedure
Reload Software (ADJ 9.3.1).
If the problem persists, replace the ESS PWB (PL 9.2).

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier