Xerox WorkCentre 5230 User Manual

February, 2008
2-348
WorkCentre 5225, 5230
024-926, 024-928
Launch Version
Status Indicator Raps
024-926 Punch Dust Box Miss Set
Detected the Finisher Punch Dust Box missing
Initial Actions
Install the Finisher Punch Dust Box.
Procedure
Check the Punch Box Set Sensor or proper operation. BSD 12.15
Check that the Punch Dust Box is properly seated.
024-928 Scratch Sheet Compile
Illegal sheet in the output to the Compiler.
Initial Actions
Clear Scratch Sheet from the A-Finisher and restart the job.
Procedure
Check for proper operation of the Finisher Entrance Sensor (PL 22.5)(BSD 12.3)
Check the P/J8704 connector at the Finisher PWB
Check the connector P/J416 connector on the IOT. (BSD 12.3)

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier