Xerox WorkCentre 5230 User Manual

February, 2008
2-274
WorkCentre 5225, 5230
018-524, 018-525
Launch Version
Status Indicator Raps
018-524 Invalid Device Network Setting RAP
1. While device DNS is not set, server name is described in job template with FQDN.
2. Transfer protocol port described in job template is not activated on device (SMB, FTP etc.).
Procedure
Check if network-related setting and port necessary to scan job execution are properly done on the
device side.
-Ensure that the DNS server setting correct.
-Ensure that the port of the designated protocol is activated.
018-525 HDD Full or HDD Access Error RAP
1. While in CUI scan start processing, internal HDD Full occurs (job template partition).
2. While in CUI scan start processing, internal HDD failure is detected.
Procedure
Retry the operation after a short interval.

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier