February, 2008
4-161
WorkCentre 5225, 5230
REP 16.2.27, REP 16.3.1
Repairs and Adjustments
Launch Version
Replacement
NOTE: Ensure that the Front and Rear Carriage Assemblies are installed at the same height.
1. Install the Front or Rear Carriage Assemblies in the reverse order of removal.
REP 16.3.1 Booklet PWB
Parts List on PL 23.21
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment with electrical
power applied to the machine.
1. Remove the Booklet PWB Cover. (REP 16.3.6)
2. Remove the Booklet PWB. (Figure 1)
a. Disconnect the Connectors (5).
b. Remove the Screws (4).
c. Remove the Booklet PWB.
To Next Page
Loading...
Need help?
General
