Xerox WorkCentre 5230 User Manual

February, 2008
2-637
WorkCentre 5225, 5230
121-314
Status Indicator Raps
Launch Version
121-314 Customize User Prompts Fail RAP
Error occurs due to the setting of impermissible combination below at Power On.
IC Card Gate EP accessories other than IC Card Gate are connected (set) or IC Card Gate and
other EP accessories are installed together (set).
[Authentication/Counting]> [Authentication/Counting management/use] is set in [External
Authentication/Counting].
Procedure
To change System Data (Chain-Link) to prevent “Detection condition”.
(For example, If Card Auditron Level2/IC Card Auditron Level2 in Network Accounting mode is
requested, Customize User Prompts shall be set to “both” or “prompt 1 only”.

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier