Xerox WorkCentre 5230 User Manual

February, 2008
2-172
WorkCentre 5225, 5230
016-330, 016-332
Launch Version
Status Indicator Raps
016-330 ESS SystemMemory Fail-1 RAP
Capacity of Slot1 loaded memory is out of spec.
Initial Actions
Power Off/On
Procedure
Remove/insert ESS DDR DIMM #1. If the problem continues, replace ESS DDR DIMM #1 (PL
11.2). If the problem persists, replace ESS PWB (PL 9.2).
016-332 ESS SystemMemory Fail-3 RAP
Capacity of Slot1 and Slot2 loaded memory is out of spec.
Initial Actions
Power Off/On
Procedure
Remove/insert ESS DDR DIMM #1 and #2. If the problem continues, replace ESS DDR DIMM
#1 and #2 (PL 11.2). If the problem persists, replace ESS PWB (PL 9.2).

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier