Xerox WorkCentre 5230 User Manual

February, 2008
2-468
WorkCentre 5225, 5230
035-701, 035-702
Launch Version
Status Indicator Raps
035-701 Fax Protocol RAP
BSD-ON:16.1/17.1
The disconnect signal was not received from the receiving Fax after transmission was not
established, or there is a time-out.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
035-702 Fax Protocol RAP
BSD-ON:16.1/17.1
For the NSS/DTC (Non-Standard Setup/Digital Transmit Command) signal sent from the Fax
controller, the DCN (Disconnect) signal was received from the receiving Fax, or transmission
was rejected by the Select Receive function on the receiving Fax.
Procedure
There is a problem with the receiving Fax. Ask customer to cancel the job and resend.
Check the connections on the FAX PWB (PL 9.2).

Xerox WorkCentre 5230 Specifications

General

Maximum print size	A3 (297 x 420 mm)
Standard input capacity	500 sheets
Internal memory	No MB
Type	Digital copier