February, 2008
6-150
WorkCentre 5225, 5230
GP 9
Launch Version
General Procedures
GP 9 Key Operator Log In
Description
This procedure describes how to log in as a Key Operator.
Procedure
1. Press the Log In/Out button on the control panel.
2. Enter 11111 using the number keypad.
NOTE: 11111 is default password. The key operator may have changed the password.
If the Authentication feature is enabled, you may be required to enter an Authentication
password. The default Authentication password is xadmin.
NOTE: If the password is changed, and is not available, the current password is stored in
NVM Read/Write [700-171].
3. Select Confirm on the UI.
4. To operate the machine select User Mode on the UI.
To Next Page
Loading...
Need help?
General
