EasyManuals Logo

D-Link DWL-8610AP User Manual

D-Link DWL-8610AP
754 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #580 background imageLoading...
Page #580 background image
AP Management
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 580
D-Link UWS User Manual
Command Buttons
The page includes the following button:
Refresh—Updates the page with the latest information.
Initiating Manual Channel Plan Assignments
If you specify Manual as the Channel Plan Mode on the Configuration tab, the Manual Channel Plan page
allows you to initiate the channel plan algorithm.
To manually run the channel plan adjustment feature, select the radio to update the channels on (5 GHz or 2.4
GHz) and click Start.
Figure 371: Manual Channel Plan
Table 339: Channel Plan History
Field Description
5 GHz (802.11a/n)
2.4 GHz (802.11b/g/n)
The 5 GHz and 2.4 GHz radios use different channel plans, so the switch tracks the
channel history separately for each radio. The channel information that displays on
the page is only for the radio you select.
Operational Status This field shows whether the switch is using the automatic channel adjustment
algorithm on the AP radios.
Last Iteration The number in this field indicates the most recent iteration of channel plan
adjustments. The APs that received a channel adjustment in previous iterations
cannot be assigned new channels in the next iteration to prevent the same APs from
being changed time after time.
On the AP Management > RF Management > Configuration tab, you can set the
history depth to control the maximum number of iterations stored and displayed in
the channel plan history.
Last Algorithm Time Shows the date and time when the channel plan algorithm last ran.
Note: To set the system time on the switch, you must use SNTP, which is disabled by
default. From the Web interface, you configure the SNTP client and server
information from the pages in the LAN > Administration > System > SNTP folder.
From the CLI, use the
sntp commands in Global Config mode.
AP MAC Address
Location
Radio
Iteration
Channel
This table displays the channel assigned to an AP in an iteration of the channel plan.

Table of Contents

Other manuals for D-Link DWL-8610AP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DWL-8610AP and is the answer not in the manual?

D-Link DWL-8610AP Specifications

General IconGeneral
2.4 GHzYes
Modulation-
Frequency band2.4 - 2.497, 4.9 - 5.85 GHz
Number of users- user(s)
Channels quantity- channels
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Wi-Fi data rate (max)1750 Mbit/s
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Flash memory64 MB
Internal memory512 MB
InternalNo
CertificationCE, FCC, IC
Product colorGray
Ethernet LAN (RJ-45) ports2
Antennas quantity6
Antenna gain level (max)6.5 dBi
Power supply typePoE, DC
Power consumption (typical)14 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Package depth265 mm
Package width238 mm
Package height112 mm
Package weight1160 g
Pallet width1200 mm
Pallet length1100 mm
Pallet height (air)1955 mm
Pallet gross weight (air)385580 g
Quantity per pallet (air)210 pc(s)
Shipping (inner) case width280 mm
Shipping (inner) case height260 mm
Shipping (inner) case length585 mm
Shipping (inner) case weight8740 g
Shipping (inner) case net weight5800 g
Number of cartons per pallet (air)42 pc(s)
Quantity per shipping (inner) case5 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth171 mm
Width198 mm
Height40 mm
Weight240 g

Related product manuals