Configuring the Wireless Distribution System
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 649
D-Link UWS User Manual
Command Buttons
The page includes the following buttons:
• Add—Allows you to configure a new WDS link for the selected group. When you click Add, the WDS Link
Create page displays.
• Submit—Select the checkbox associated with a link to modify the Link Cost value. Click Apply to update
the switch with the value you enter.
• Delete— Deletes the selected WDS link.
• Refresh—Updates the page with the latest information.
WDS Link Create
When you click Add from the WDS AP Link Configuration page, the WDS Link Create page displays. From this
page, you can create WDS links between APs in the WDS group.
Figure 407: WDS Link Create
The following table shows the fields available on the WDS Link Create page.
Note: If no links have been configured for the selected WDS group, only the Add and Refresh buttons
display.
Note: After you change WDS-Managed AP group settings, make sure you push the configuration to
other switches in the cluster.
Table 373: WDS Link Create
Field Description
Source AP MAC Address MAC Address of the source AP.
Note: The WDS links are bidirectional. The terms Source and Destination
simply help to differentiate between the WDS link endpoints.
Source AP Radio The radio number of the WDS link endpoint on the source AP.
Destination AP MAC Address The MAC address of the destination AP in the group.
Destination Radio The radio number of the WDS link endpoint on the destination AP.