D-Link DWL-8610AP User Manual

Understanding the User Interfaces
D-Link Unified Wired and Wireless Access System
Oct. 2015 Page 61
D-Link UWS User Manual
Using SNMP
You can manage the D-Link DWS-4000 Series switch using SNMP. You can configure SNMP groups and users
that can manage traps that the SNMP agent generates.
D-Link DWS-4000 Series uses both standard public MIBs for standard functionality and private MIBs that
support additional switch functionality. SNMP is enabled by default.
Any user can connect to the switch using the SNMPv3 protocol, but for authentication and encryption, you
need to configure a new user profile. To configure a profile by using the CLI, see the SNMP section in the D-
Link DWS-4000 Series CLI Command Reference. To configure an SNMPv3 profile by using the Web interface,
use the following steps:
1. Select LAN > Administration > User Accounts from the hierarchical tree on the left side of the Web
interface.
2. From the User menu, select Create to create a new user.
3. Enter a new user name in the User Name field.
4. Enter a new user password in the Password field and then retype it in the Confirm Password field.
To use SNMPv3 Authentication for this user, set a password of eight or more alphanumeric characters.
5. To enable authentication, use the Authentication Protocol menu to select either MD5 or SHA for the
authentication protocol.
6. To enable encryption, use the Encryption Protocol menu to select DES for the encryption scheme. Then,
enter an encryption code of eight or more alphanumeric characters in the Encryption Key field.
7. Click Submit.

D-Link DWL-8610AP Specifications

General

2.4 GHz	Yes
Modulation	-
Frequency band	2.4 - 2.497, 4.9 - 5.85 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Wi-Fi data rate (max)	1750 Mbit/s
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Flash memory	64 MB
Internal memory	512 MB
Internal	No
Certification	CE, FCC, IC
Product color	Gray
Ethernet LAN (RJ-45) ports	2
Antennas quantity	6
Antenna gain level (max)	6.5 dBi
Power supply type	PoE, DC
Power consumption (typical)	14 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Package depth	265 mm
Package width	238 mm
Package height	112 mm
Package weight	1160 g
Pallet width	1200 mm
Pallet length	1100 mm
Pallet height (air)	1955 mm
Pallet gross weight (air)	385580 g
Quantity per pallet (air)	210 pc(s)
Shipping (inner) case width	280 mm
Shipping (inner) case height	260 mm
Shipping (inner) case length	585 mm
Shipping (inner) case weight	8740 g
Shipping (inner) case net weight	5800 g
Number of cartons per pallet (air)	42 pc(s)
Quantity per shipping (inner) case	5 pc(s)

Weight and Dimensions

Depth	171 mm
Width	198 mm
Height	40 mm
Weight	240 g