D-Link DWL-8610AP User Manual

Configuring a Network to Use WPA2-Enterprise and Dynamic
VLANs
D-Link Unified Wired and Wireless Access System
July 2012 Page 707
D-Link UWS User Manual
Configuring Client Information on the RADIUS Server
To use WPA-Enterprise and RADIUS-assigned VLANs, you must configure information about the clients on the
network RADIUS server. The configuration of your RADIUS server will vary depending on the manufacturer of
the RADIUS server, but the parameters for dynamic VLAN tagging are the same, regardless of the RADIUS
server you use.
The following parameters should be set to allow for Dynamic VLAN Tagging where <vlan-ID> is the VLAN to
assign to each user.
• Tunnel-Type = 13,
• Tunnel-Medium-Type = 6,
• Tunnel-Private-Group-ID = <vlan-ID>
This example describes how to configure the FreeRADIUS server (available from FreeRADIUS.org) with the
users in Table 389.
To configure the FreeRADIUS server:
1. Edit the etc/raddb/users.conf file, which contains the user account information, and add the new users.
The following code shows an example of the entry for the accountant and engineer users:
accountant User-Password == "accountant"
Tunnel-Type = 13,
Tunnel-Medium-Type = 6,
Tunnel-Private-Group-ID = 30
engineer User-Password == "engineer"
2. Edit the etc/raddb/clients.conf file to allow the switch to act as a client for the RADIUS server.
The following code shows an example of the entry in the clients file that allows the switch to authenticate
with the RADIUS server:
client 10.27.65.0/24 {
secret = secret12345
shortname = private-network-1
}
The client network in the entry includes the IP address of the switch. The secret matches the secret to be
configured on the switch. The secret must match on both systems
Table 389: Wireless LAN Users
Username Password Group VLAN
accountant accountant Accounting VLAN 30
engineer engineer Corporate None assigned

D-Link DWL-8610AP Specifications

General

2.4 GHz	Yes
Modulation	-
Frequency band	2.4 - 2.497, 4.9 - 5.85 GHz
Number of users	- user(s)
Channels quantity	- channels
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Wi-Fi data rate (max)	1750 Mbit/s
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Flash memory	64 MB
Internal memory	512 MB
Internal	No
Certification	CE, FCC, IC
Product color	Gray
Ethernet LAN (RJ-45) ports	2
Antennas quantity	6
Antenna gain level (max)	6.5 dBi
Power supply type	PoE, DC
Power consumption (typical)	14 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Package depth	265 mm
Package width	238 mm
Package height	112 mm
Package weight	1160 g
Pallet width	1200 mm
Pallet length	1100 mm
Pallet height (air)	1955 mm
Pallet gross weight (air)	385580 g
Quantity per pallet (air)	210 pc(s)
Shipping (inner) case width	280 mm
Shipping (inner) case height	260 mm
Shipping (inner) case length	585 mm
Shipping (inner) case weight	8740 g
Shipping (inner) case net weight	5800 g
Number of cartons per pallet (air)	42 pc(s)
Quantity per shipping (inner) case	5 pc(s)

Weight and Dimensions

Depth	171 mm
Width	198 mm
Height	40 mm
Weight	240 g