February 2013
6-255
ColorQube® 9303 Family
dC132
General Procedures/Information
dC132 Serial Number
Purpose
To display the machine serial number.
Procedure
1. Enter service mode, GP 1.
2. Select the Maintenance tab.
3. Select dC132 Serial Number.
4. The machine serial number or ‘##########’ is displayed.
5. If ‘##########’ is displayed a 03-398-00 fault has occurred and the serial number is cor-
rupt. Perform Serial Number Restore.
Serial Number Restore
1. Locate the machine serial number label, Figure 1.
NOTE: Take great care when entering the serial number. Ensure that you have correctly
read the serial number label. If you enter an incorrect number it cannot be changed with
-
out performing an NVM reset. This will cause the machine to run at a default 30 pages per
minute.
2. Enter the serial number.
3. Select Save.
4. Select Save on the confirmation screen.
5. Select Close to exit the routine.
6. Select Call Closeout to exit service mode.
Figure 1 Location of machine serial number label
To Next Page
Loading...
Need help?
General
