February 2013
6-302
ColorQube® 9303 Family
Finisher (2K LCSS) Tags, Finisher (2K LCSS) Tags
General Procedures/Information
TAG: D-004
CLASS: 4
NAME: White CVT roll Kit
PURPOSE: To eliminate grey circles appearing on prints when copying hole punched origi-
nals.
KIT NUMBER: -
PARTS LIST ON: PL 5.25
TAG: D-005
CLASS: 3
NAME: Feed clutch and spacer kit
PURPOSE: Design improvement on the original clutch
KIT NUMBER: -
PARTS LIST ON: PL 5.15 Item 28
TAG: D-007
CLASS: 4
NAME: DADH sensor replacement kit
PURPOSE: New style DADH input tray sensors which are less sensitive to bright overhead
lighting which causes wrong size detection, wrong size Fax sent, enlarge or
reduce the document size.
KIT NUMBER: -
PARTS LIST ON: PL 31.11 Item 17
TAG: D-050
CLASS: 5
NAME: Restriction of Hazardous Substances (RoHS)
PURPOSE: To identify RoHS compliant machines. Refer to GP 26.
KIT NUMBER: -
PARTS LIST ON: -
Finisher (2K LCSS) Tags
TAG: F-001
CLASS: 5
NAME: New LCSS graphic labels
PURPOSE: New jam clearance instructions
KIT NUMBER: -
PARTS LIST ON: -
TAG: F-002
CLASS: 5
NAME: LCSS tamper arms and exit sensor timing
PURPOSE: To improve stacking performance
KIT NUMBER: -
PARTS LIST ON: -
TAG: F-003
CLASS: 5
NAME: LCSS entry guide cover change
PURPOSE: Improve performance
KIT NUMBER: -
PARTS LIST ON: -
TAG: F-004
CLASS: 5
NAME: LCSS noise reduction kit
PURPOSE: Reduction of operational noises
KIT NUMBER: -
PARTS LIST ON: -
To Next Page
Loading...
Need help?
General
