February 2013
4-69
ColorQube® 9303 Family
REP 10.7
Repairs/Adjustments
REP 10.7 Pre Transfix Sensor
Parts List on PL 88.10
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 14. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Use care when working near the drum. The drum can be damaged easily, which will cause
print quality defects.
1. Open the front door.
2. Remove the inner cover, PL 81.11 Item 2.
To Next Page
Loading...
Need help?
General
