February 2013
6-304
ColorQube® 9303 Family
Finisher (HVF) Tags, Post Process Inserter Tray 6
General Procedures/Information
Finisher (HVF) Tags
TAG: V-001
CLASS: 2
NAME: Modification to the inserter connector
PURPOSE: Pin 3 (ground 24V) and pin 4 (24V) on the bulk head connector on the HVF for
the inserter unit are to close together and could be shorted.
On the HVF PWB, PJ703 pins 2 and 3 are changed position. On the Inserter
PWB, PJ 5 pins 2 and 3 are changed position. This changes the position of the
ground 24V.
KIT NUMBER: -
PARTS LIST ON: -
TAG: V-002
CLASS: 5
NAME: Lower paddle switch
PURPOSE: Mod TAG002 may have been struck in manufacturing, but is not a valid mod
tag.
KIT NUMBER: -
PARTS LIST ON: -
TAG: V-003
CLASS: 5
NAME: Guide hinge pin
PURPOSE: Mod TAG003 may have been struck in manufacturing, but is not a valid mod
tag.
KIT NUMBER: -
PARTS LIST ON: -
TAG: V-004
CLASS: 5
NAME: Ejector with removable paddle assembly
PURPOSE: Allows replacement of Ejector paddle assembly without needing to replace
entire ejector.
KIT NUMBER: -
PARTS LIST ON: PL 12.110 Item 2, PL 12.110 Item 22
TAG: V-005
CLASS: 5
NAME: Three blade lower paddle.
PURPOSE: Located in the paddle unit to improve the contact force on documents in the
ejector assembly.
KIT NUMBER: -
PARTS LIST ON: PL 12.115 Item 2
TAG: V-050
CLASS: 5
NAME: Restriction of Hazardous Substances (RoHS)
PURPOSE: To identify RoHS compliant machines. Refer to GP 26.
KIT NUMBER:
PARTS LIST ON:
To Next Page
Loading...
Need help?
General
