Configuration
3.4 Configuration Save & Restore
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
113
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Call up the command with the following parameters:
restart[{factory}]
The parameters have the following meaning:
Restarts the system with the factory configuration settings
If you do not select any parameters from the parameter list, the system restarts with the
current configuration.
The device is restarted with the selected settings.
Configuration Save & Restore
This section describes commands for displaying, saving and restoring configuration settings.
write startup-config
Description
With this command, you save the changes to the configuration in the configuration file.
The use of this command is required in the Trial mode. It can also be used in "auto save
mode".
● The Trial mode is activated.
● You are in the Privileged EXEC mode.
The command prompt is:
*cli(...)#
To Next Page
Loading...
Need help?
General