Siemens SCALANCE XR-500 Configuration Manual

Layer 2 management protocols
8.3 IGMP querier
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
402 Configuration Manual, 11/2015, C79000-G8976-C252-10
Syntax
Call the command without parameters:
ip igmp snooping querier
As default the function is "disabled".
Result
The IGMP snooping switch is configured as querier.
Further notes
You delete the setting with the no ip igmp snooping querier command.
You can display the status of this function and other information with the
show ip igmp
snooping
command.
8.3.1.2
no ip igmp snooping querier
Description
With this command, you delete the configuration of an IGMP snooping switch as querier.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no ip igmp snooping querier
Result
The configuration of the IGMP snooping switch as querier is deleted.
Further notes
You configure the setting with the ip igmp snooping querier command.
You can display the status of this function and other information with the
show ip igmp
snooping
command.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English