Siemens SCALANCE XR-500 Configuration Manual

Layer 3 functions
9.7 RIPng (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
610 Configuration Manual, 11/2015, C79000-G8976-C252-10
9.7.1.4
show ipv6 rip peer-trig-update-interval
Description
This command shows the configured timers.
Requirement
● Routing with RIPng is enabled.
● You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show ipv6 rip peer-trig-update-interval
Result
The information is displayed.
9.7.1.5
show ipv6 rip stats
Description
This command shows statistical information, e.g. the number of updates.
Requirement
● Routing with RIPng is enabled.
● You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show ipv6 rip stats
Result
The information is displayed.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English