Network structures
6.3 Spanning Tree
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
252 Configuration Manual, 11/2015, C79000-G8976-C252-10
You cancel the assignment of the VLAN to an MST instance with the no instance command.
You delete the MST instance with the
no instance command.
You display this setting and other information with the
show spanning-tree mst
configuration
command.
With this command, you cancel the assignment of a VLAN to an MST instance or delete the
MST instance.
You are in the MSTP Configuration mode.
The command prompt is as follows:
cli(config-mst)#
Call up the command with the following parameters:
no instance <instance-id (1-64)> [vlan <vlan-range>]
The parameters have the following meaning:
Number of the MST instance
Keyword for a VLAN connection
Range of VLANs that will be deleted
enter the range limts with a hy-
If you specify a VLAN or a VLAN range, the assignment to an MST instance is canceled.
If you do not specify a VLAN, the MST instance is deleted.
The assignment of a VLAN to an MST instance is canceled or the MST instance is deleted.
You assign a VLAN to an MST instance with the instance command.
You display this setting and other information with the
show spanning-tree mst
configuration
command.
To Next Page
Loading...
Need help?
General