Siemens SCALANCE XR-500 Configuration Manual

Layer 3 functions
9.3 OSPFv3 (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
511
Syntax
Call up the command with the following parameters:
area <area-id>
{ {
stub | nssa
} [
no-summary
] }
The parameters have the following meaning:
Parameter
Description
Range of values / note
area-id
Area ID Specify the ID in the IPv4 address
format
x.x.x.x = 0 ... 255
0.0.0.0 = backbone area
stub
Stub area
The LSA types router, network, inter-
area prefix, intra-area prefix and link
are stored in the database.
-
nssa
NSSA
Stub area that also has external rout-
ing information (NSSA-LSA)
-
no-summary
NSSA / stub areas doe not receive
any inter-area prefix LSAs (summary
LSA)
only with area border routers
Result
The area of the type NSSA or stub is configured.
Further notes
You change the type of the area with the no area command.
You can display the status of this function and other information with the
show ipv6 ospf
areas
command.
You display the content of the database with the
show ipv6 ospf ... database ...
command.
9.3.3.2
no area
Description
With this command, you remove or change an area. To remove an area, there must be no
IPv6 interface connected to it.
Note
This command is available only with layer 3.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English