Siemens SCALANCE XR-500 Configuration Manual

Network protocols
7.2 IPv6 protocol
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
280 Configuration Manual, 11/2015, C79000-G8976-C252-10
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
clear ipv6 traffic
Result
The statistics counters have been reset.
Further notes
You display the statistics with the show ipv6 traffic command.
7.2.2
The "show" commands
This section describes commands with which you display various settings.
7.2.2.1
show ipv6 neighbors
Description
This command shows IPv6 neighbors table.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameter assignment:
show ipv6 neighbors
Result
The IPv6 neighbors table is displayed.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English