Siemens SCALANCE XR-500 Configuration Manual

Configuration
3.5 PoE
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
121
Syntax
Call up the command with the following parameters:
poe pse <integer(1-4)> MaximumPower <integer(1-90)>
The parameters have the following meaning:
Parameter
Description
Range of values / note
integer
Number of the PSE
1 … 4
integer
Value for the maximum power 1 ... 90
Result
The value for the maximum power is configured.
Further notes
You delete the value for the parameter "Maximum Power" with the no poe pse MaximumPower
command.
3.5.2.2
no poe pse MaximumPower
Description
With this command, you delete the value for the "Maximum Power" parameter.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no poe pse <integer(1-4)> MaximumPower
The parameters have the following meaning:
Parameter
Description
Range of values / note
integer
Number of the PSE
1 … 4
Result
The value for the maximum power is deleted.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English