Siemens SCALANCE XR-500 Configuration Manual

Network protocols
7.3 DHCPv4 client (IPv4)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
306 Configuration Manual, 11/2015, C79000-G8976-C252-10
Result
IPv6 router advertisement packets are not distributed.
Further notes
You display this setting and other information with the show ipv6 interface command.
You disable the distribution of IPv6 router advertisement packets with the command
ipv6 nd
suppress-ra
.
7.3
DHCPv4 client (IPv4)
This section describes commands of the Dynamic Host Configuration Protocol (DHCP).
7.3.1
The "show" commands
This section describes commands with which you display various settings.
7.3.1.1
show ip dhcp client stats
Description
With this command, you display the statistical counters of the DHCP client.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show ip dhcp client stats
Result
The counters are displayed.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English