Siemens SCALANCE XR-500 Configuration Manual

Layer 3 functions
9.3 OSPFv3 (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
525
9.3.3.12
passive-interface
Description
With this command, you specify that the OSPFv3 interfaces are inactive, that are configured
afterwards.
Note
This command is available only with layer 3.
Requirement
You are in the OSPFv3 router configuration mode.
The command prompt is as follows:
cli(config-ospfv3)#
Syntax
Call the command without parameter assignment:
passive-interface
Result
The configuration is active.
Further notes
You disable the configuration with the no passive-interface command.
You can display the status of this function and other information with the
show ipv6 ospf
interface
command.
9.3.3.13
no passive-interface
Description
With this command, you specify that the OSPFv3 interfaces are active, that are configured
afterwards.
Note
This command is available only with layer 3.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English