Layer 2 management protocols
8.7 MLD Snooping (IPv6)
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
430 Configuration Manual, 11/2015, C79000-G8976-C252-10
show ipv6 mld snooping globals
Description
This command shows general information on MLD snooping for the device.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameter assignment:
show ipv6 mld snooping globals
The information is displayed.
show ipv6 mld snooping statistics
Description
This command shows the MLD snooping statistics for all or a selected VLAN.
● MLD snooping is enabled.
● You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call up the command with the following parameters:
show ipv6 mld snooping statistics [Vlan <vlan id>]
The parameters have the following meaning:
Keyword for a VLAN connection
Number of the addressed VLAN 1 ... 4094
If you specify VLAN, the configuration of all VLANs is displayed.
To Next Page
Loading...
Need help?
General