Siemens SCALANCE XR-500 Configuration Manual

Security and authentication
11.5 Port Access Control List Locked Ports
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
732 Configuration Manual, 11/2015, C79000-G8976-C252-10
Syntax
Call the command without parameters:
clear-all-static-unicast
Result
The static unicast MAC address entries are deleted from the MAC address table.
11.5.2.2
auto-learn
Description
With this command, you change to the AUTOLEARN mode.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
auto-learn
Result
You are now in the AUTOLEARN mode.
The command prompt is as follows:
cli(config-auto-learn)#
Further notes
You exit the AUTOLEARN configuration modewith the command end or exit.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English