Siemens SCALANCE XR-500 Configuration Manual

SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
145
System time
5
5.1
System time setting
This section describes commands relevant for the configuration of the system time.
5.1.1
The "show" commands
This section describes commands with which you display various settings.
5.1.1.1
show time
Description
This command shows the settings of the system clock.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show time
Result
The settings for the system clock are displayed.
5.1.1.2
show dst info
Description
This command shows all the entries for daylight saving time stored on the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English