Diagnostics
12.5 RMON
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
811
Note
Conditions for working with alarms
The events assigned to the alarms are configured.
The Remote monitoring function is started with the rmon
command.
The alarm for monitoring a MIB variable is configured.
You delete an alarm with the no rmon alarm command.
You display the list of configured RMON alarms with the
show rmon alarms command.
no rmon alarm
Description
With this command, you delete an alarm for monitoring a MIB variable.
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Call up the command with the following parameters:
no rmon alarm <number (1-52)>
The parameter has the following meaning:
Number of the alarm to be deleted 1 ... 52
The entry for monitoring a MIB variable is deleted.
To Next Page
Loading...
Need help?
General