Description
2.7 General CLI commands
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
55
This command shows the last 14 commands you entered.
The commands are listed in the order in which they were called up. The
show history
command is listed as the last command to be entered.
The list depends on the mode. In the Global configuration mode, the last 14 commands
entered in this mode are displayed. These commands are not included in the list of the
Interface configuration mode.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show history
The list of used commands is displayed.
clear history
Description
This command deletes the last commands you entered.
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Call the command without parameters:
clear history
To Next Page
Loading...
Need help?
General