Siemens SCALANCE XR-500 Configuration Manual

Diagnostics
12.5 RMON
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
806 Configuration Manual, 11/2015, C79000-G8976-C252-10
You display the configuration settings with the show monitor session command.
12.4.2.9
no monitor session
Description
With this command, you delete the monitor session.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no monitor session<session-id(1-7)>
The parameter has the following meaning:
Parameter
Description
Range of values / note
session-id
Number of the session
7 parallel sessions are possible only
with port-based mirroring and their
ports must not overlap.
1 ... 7
Result
The monitor session is deleted.
Further notes
You display the configuration settings with the show monitor session command.
You configure and start mirroring of a port with the
monitor session command.
12.5
RMON
The RMON function provides commands with which variables of the Management
Information Base (MIB) can be monitored for violation of limit values and to store or forward
these events in the following ways:
● Entry in the local log
● Sending as SNMP trap
● Transfer to the Syslog server
● Transfer to a network management station using SNMP

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English