Diagnostics
12.5 RMON
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
814 Configuration Manual, 11/2015, C79000-G8976-C252-10
rmon collection stats
Description
With this command, you start the recording of statistical data of an interface.
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Call up the command with the following parameters:
rmon collection stats <index (1-52)>[owner<ownername(127)>]
The parameters have the following meaning:
User to which the event is assigned
The recording of statistical data is started.
You can display the content of a recording with the show rmon statistics command.
no rmon collection stats
Description
With this command, you end the recording of statistical data of an interface.
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
To Next Page
Loading...
Need help?
General