Siemens SCALANCE XR-500 Configuration Manual

Configuration
3.1 System
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
97
Requirement
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
shutdown
Result
The Interface is shut down. A connection continues to be indicated if a switch port is turned
off. The LED for the port status flashes 3 times cyclically. However no data is sent or
received.
Further notes
You activate the interface with the no shutdown command.
You can display the status of this function and other information with the
show
interfaces
command.
3.1.13.16
no shutdown
Description
With this command, you shut down an interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no shutdown
Result
The Interface is activated.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English