Siemens SCALANCE XR-500 Configuration Manual

Diagnostics
12.5 RMON
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
807
12.5.1
The "show" commands
This section describes commands with which you display various settings.
12.5.1.1
show rmon
Description
This command shows the settings of the remote monitoring function.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show rmon [statistics [<stats-index (1-65535)>]] [alarms] [events] [history [history-
index (1-65535)] [overview]]
The parameters have the following meaning:
Parameter
Description
Range of values / note
statistics
Shows counts for various packet char-
acteristics and sizes.
-
stats-index
Index number for the statistical values 1 ... 65535
alarms
Shows the threshold values and event
assignments for alarms.
-
events
Shows the status and the actions that
are triggered.
-
history
Shows the stored statistical values for
earlier transmission periods.
-
history-index
Index number for the previous statisti-
cal values
1 ... 65535
overview
Displays an overview.
-
With this command, you can display several parameters with one call.
If you do not select any parameters from the parameter list, only the
enabled or disabled
status is shown.
Result
The settings of the remote monitoring function are displayed.

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English